 | PASSABLENESS
OF THE CAR |  |
Removal and installation of a forward suspension
bracket zadne-privodnyh cars
For removal of a forward suspension
bracket the car establish on the lift or осмотровую a ditch, tighten
a lay brake, remove forward wheels and, keeping a key the end of
a rod of the shock-absorber for , disconnect the top end of the
shock-absorber. Having unbent lock plates, bolts of fastening of
a support to an arm turn on, take a support aside and fix it so
that it did not hang on hoses. Remove shock-absorbers with arms;
disconnect the ends of a bar of the stabilizer from the bottom levers
of a suspension bracket; a stripper fingers of hinges of a steering
drive from apertures also take steering draughts aside.
For compression of a spring of a suspension bracket use special
adaptations. Installation of knots and details of a forward suspension
bracket carry out in an order, the return to removal. Thus on a
forward suspension bracket establish springs of one group for what
them mark a paint. To warn wrong distribution of efforts in hinges,
nuts and axes of levers tighten in a following order: establish
the car on an equal platform; wheels direct directly; load the car
in weight of 320 kg for what in it four persons sit down, and in
a luggage carrier put 40 kg of cargo.
Dinamometrichesky key tighten nuts of fastening of axes top, and
then bottom levers and a nut of fastening of an axis of the bottom
lever to a cross-beam. After that do check and adjustment of corners
of installation of wheels.
| 
